Jeep Brake Services Temecula CA
Jeep Brake Services Temecula CA
Brought to you by DCH Chrysler Dodge Jeep Ram of Temecula
The braking system in your Jeep must be properly maintained in order to assure proper safety, handling, and performance. Every driver wants the peace of mind knowing that the brakes on their vehicle aren’t going to fail when driving. In order to ensure your brakes on your Jeep are in good working condition, it’s a good idea to get them inspected regularly. Let’s take a look at what this involves.
How do my brakes function on my Jeep?
First, let’s look at how today’s brakes function. Most Jeeps have disc brakes. These function in much the same way as the brakes on a bicycle does. For example, when you squeeze the brakes on your 10-speed, a set of rubber pads grip both sides of the turning wheel rim and the resultant friction slows down the bike. It’s similar with a car except that instead of rubber pads, a hydraulic system filled with brake fluid squeezes the spinning rotors attached to each of your wheels with special brake pads. The problem? These brake pads wear out after a while and need to be replaced.
How do I know when my brake pads on my Jeep are worn out?
This is when the certified Jeep technicians at DCH come into play. During state inspections, the mechanics at DCH check the thickness of the brake pads to judge if they are worn excessively. The pads should be some 6.4 mm thick or more. By the way, if you have spoked rims on your car, you may be able to look through your wheel spokes and see yourself if the brake pads are in the 6.4mm or more range. In general, though it’s easier to see underneath the car when a mechanic has it up on a lift.
There is another indication that it may be time to have your brake pads replaced: a squeaking sound when you step on your brakes. Most brake pad manufacturers put little metal tabs on their brake pads that make a very distinctive squeaking sound when their pads wear thin. This will occur when applying the brake. If you hear that sound, it’s time to drop by DCH and have them look!
Are there other warning signs to look for on my Jeep?
Yes, how does the brake pedal “feel.” Is the pedal mushy or goes close to the floor before engaging? This usually requires a common procedure called bleeding the brakes. Then there is the pulsating brake pedal. If your brake pedal pulses rapidly when you step on the brakes, then you may have one or more things going on.
You can trust your Jeep's brakes to DCH Chrysler Dodge Jeep Ram of Temecula
Have your brakes inspected periodically and keep your eyes and ears open for issues, like noise or pulsating. If you have any concerns at all, stop by the service department at DCH Chrysler Dodge Jeep Ram and have a technician take a look.
